Stuart Turner Showermate TP Standard Twin Shower Pump -
2.0 Bar - Black
Brand: Stuart Turner
Black Finish. 1 Year Guarantee from Stuart Turner.
Pump control: Flow Switch. Anti-vibration mounting feet. Flexible
hoses: 4. Dry run protection. Inlet strainer. Typical noise: 53
dB(A). Connections (Inlet) G ¾ female x 15 mm push-in x 185 mm
long. Connections (outlet) G ¾ female x 15 mm push-in x 175 mm
long. Series wound, manual reset thermal trip Motor type.
Intermittent S3 (30 mins on / 30 mins off @ 9 l/min) Duty rating.
IPX2 Enclosure protection. Suitable for positive head applications.
High quality entry level plastic pump supplied with 15 mm flexible
hoses. Quiet operation. WRAS approved product. Intermittently
rated. EPDM/Carbon/Al.Oxide seal. Pre-wired with 1.5 metre power
cable. Low pressure gravity systems - boosting hot or cold water
supplies to a single shower or to up to four outlets within a
bathroom. Showermate Standard pumps are suitable for use where
there is already more than 1 litre/min flow from the outlet(s) to
be boosted. Must not be connected directly to the mains water
supply. The maximum pressure that can be applied to the pump under
any installation conditions.. A stored water temperature of
60 oC is considered sufficient to meet all normal requirements
and will minimise deposition of scale in hard water areas.. Both
heads pumping 4.5 l/min and above. Power Supply (VAC|PH|HZ):
230VAC|1|50HZ. Power Consumption: 300 Watts. Current - Full Load:
1.5 Amps. Fuse Rating: 3 Amps. Power Cable Length: 1.5 Metres
(Pre-Wired). Maximum Head - Closed Valve: 2.0Bar/20 Metres.
Performance @ 50L/Min: . Performance @ 100L/Min: . Performance @
9L/Min: 1.5Bar. Performance @ 18L/Min: 0.9Bar. Maximum Flow: 35
L/Min. Maximum Static Inlet Pressure: 10 Metres
Store: designerbathroomconcepts.com
Price:
222.30
GBP
Go to the store