Stuart Turner Monsoon Standard Twin Shower Pump - 3.0 Bar
- Black
Brand: Stuart Turner
Black Finish. Manufactured from Brass. 5 Year
Guarantee from Stuart Turner. Pump control: Flow Switch. Mechanical
seal: EPDM / PTFE / Al. Oxide. Anti-vibration feet. Inlet strainer.
Flexible hoses: 4. Dry run protection. Typical noise: 54 dB(A).
WRAS Approved Product. UKCA, CE Conformity Certification.
Connections (UK model): G ¾ female x 22 mm push-in 300 mm long
Isolating valves on all hoses. Connections (ROI model): G ¾ female
x 21 mm push-in 300 mm long Isolating valves on all hoses.
Connections (Export model): G ¾ female x G ¾ female 300 mm long.
Induction, auto-reset thermal trip Motor Type. Continuous (S1) @ 9
l/min and above Duty rating. IPX4 Enclosure protection. The maximum
pressure that can be applied to the pump under any installation
conditions.. A stored water temperature of 60 oC is considered
sufficient to meet all normal requirements and will minimise
deposition of scale in hard water areas.. Both heads pumping 4.5
l/min and above. Suitable for positive head applications. Premium
quality brass pump supplied with flexible hoses with integral ISO
valves. Very quiet operation. WRAS approved product. Continuously
rated. Anti-vibration feet. EPDM/PTFE/Al. Oxide seal. Pre-wired
with 1.5 metre power cable. UK Specification: Supplied with 22 mm
push-in x 300 mm anti-vibration flexible hoses with integral
isolating valves. ROI Specification: Supplied with 21 mm push-in x
300 mm anti-vibration flexible hoses with integral isolating
valves. Export Specification: Supplied with G ¾ female x 300 mm
long hoses. Designed to boost both hot and cold water supplies
equally. Capable of boosting water pressure for a host of domestic
& light commercial applications from a single tap or shower to
a complete bathroom or the whole property. System friendly
peripheral design - reduces the potential of the airlock. Extended
life mechanical seal - Hard faced nitrile/carbon/silicon carbide
seal. Continuously rated. High capacity inlet strainer - prevents
debris from entering the pump for an extended life. Works under
positive head conditions only. Supplied with 4 x 300mm
anti-vibration flexible hoses with integral isolating valves. It
can be used to boost hot and cold water services to the complete
home, bathroom, kitchen or cloakroom and also be used to boost hot
and cold water supplies to a high-performance shower system. Power
Supply (VAC|PH|HZ): 230VAC|1|50HZ. Power Consumption: 640 Watts.
Current - Full Load: 2.8 Amps. Fuse Rating: 5 Amps. Power Cable
Length: 1.5 Metres (Pre-Wired). Maximum Head - Closed Valve:
3.0Bar/30 Metres. Performance @ 9L/Min: 2.5Bar. Performance @
18L/Min: 2.1Bar. Maximum Flow: 60 L/Min. Maximum Static Inlet
Pressure: 14 Metres
Store: designerbathroomconcepts.com
Price:
705.80
GBP
Go to the store