Stuart Turner Monsoon Standard Twin Shower Pump - 4.0 Bar
- Black
Brand: Stuart Turner
. Black Finish. Manufactured from Brass. 5 Year
Guarantee from Stuart Turner. Pump control: Flow Switch. Mechanical
seal: EPDM / PTFE / Al. Oxide. Anti-vibration feet. Inlet strainer.
Flexible hoses: 4. Dry run protection. WRAS Approved Product. UKCA,
CE Conformity Certification. Connections (UK model): G ¾ female x
22 mm push-in 300 mm long Isolating valves on all hoses.
Connections (ROI model): G ¾ female x 21 mm push-in 300 mm long
Isolating valves on all hoses. Connections (Export model): G ¾
female x G ¾ female 300 mm long. Induction, auto-reset thermal trip
Motor Type. Continuous (S1) @ 9 l/min and above Duty rating. IPX4
Enclosure protection. The maximum pressure that can be applied to
the pump under any installation conditions.. A stored water
temperature of 60 oC is considered sufficient to meet all
normal requirements and will minimise deposition of scale in hard
water areas.. Both heads pumping 4.5 l/min and above. Suitable for
positive head applications. Premium quality brass pump supplied
with flexible hoses with integral ISO valves. Very quiet operation.
WRAS approved product. Continuously rated. Anti-vibration feet.
EPDM/PTFE/Al. Oxide seal. Pre-wired with 1.5 metre power cable. UK
Specification: Supplied with 22 mm push-in x 300 mm anti-vibration
flexible hoses with integral isolating valves. ROI Specification:
Supplied with 21 mm push-in x 300 mm anti-vibration flexible hoses
with integral isolating valves. Export Specification: Supplied with
G ¾ female x 300 mm long hoses. Designed to boost both hot and cold
water supplies equally. Capable of boosting water pressure for a
host of domestic & light commercial applications from a single
tap or shower to a complete bathroom or the whole property. System
friendly peripheral design - reduces the potential of the airlock.
Extended life mechanical seal - Hard faced nitrile/carbon/silicon
carbide seal. Continuously rated. High capacity inlet strainer -
prevents debris from entering the pump for an extended life. Works
under positive head conditions only. Supplied with 4 x 300mm
anti-vibration flexible hoses with integral isolating valves. It
can be used to boost hot and cold water services to the complete
home, bathroom, kitchen or cloakroom and also be used to boost hot
and cold water supplies to a high-performance shower system. Power
Supply (VAC|PH|HZ): 230VAC|1|50HZ. Power Consumption: 890 Watts.
Current - Full Load: 4 Amps. Fuse Rating: 13 Amps. Power Cable
Length: 1.5 Metres (Pre-Wired). Maximum Head - Closed Valve:
4.2Bar/42 Metres. Performance @ 9L/Min: 3.5Bar. Performance @
18L/Min: 3.0Bar. Maximum Flow: 65 L/Min. Maximum Static Inlet
Pressure: 14 Metres
Store: designerbathroomconcepts.com
Price:
766.00
GBP
Go to the store