CHESTNUT Cut 'n' Polish 225ml
Brand: Chestnut
Chestnut Cut 'n' Polish 225 ml Key Features: Cut’n’Polish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay ‘wet’ slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of Cut’n’Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time. On sealed wood apply after the sealer in the same way, polishing to a slightly higher shine. Cut’n’Polish dries almost immediately and can be overcoated with Friction Polish or any of our waxes for a higher shine. Specification: Typical uses: To assist in finer finishing of turned workpieces Method of application: Cloth Drying time: Almost immediately Compatibility: Can be overcoated with friction polish or waxes. Tips: Sand to 240 grit , apply a thin coat whilst the lathe is stopped then carefully buff with the lathe switched on. Safety Considerations: Highly Flammable. Does not contain harmful solvents(see Safety Data Sheet or warnings on can for full details). Chestnut Safety Data Sheet - Cut 'n' Polish
Store: www.machinery4wood.co.uk
Price:
11.58
GBP
Go to the store