Pine/oak Contemporary Square Profile Timber Base Rail 30mm X 61mm For 41mm Spindle, Pine, 3600mm
Brand: Unbranded
Square Profile Base Rail Contemporary Square Profile Base Rail suitable for any 41mm Spindle. This product is only available in Pine or Oak - please request a quote for other timber types Square Profile Base Rail Measures 30mm High x 61mm Wide Select your timber type and handrail length from the drop down boxes above This base rail can be used with any 41mm x 41mm spindle either on the staircase or across the landing. All Base Rails come complete with fillet strip/ Spindle Spacers used to fill the gap between each spindle. Spindle spacers are fixed in place with a suitable PVA wood adhesive, available in our shop, and can be pinned into place using panel pins. Panel pins should be sunk into the fillet strip of the rail and filled with a wood filler to match the timber. We recommend that spindles and fillet strips are glued into the handrail and base rail using PVA wood adhesive. This will give strength and stop any potential spindle rattle. 90 Degree horizontal handrail bends are not available for this profile however these can be created during installation by cutting a miter in the handrail and forming a 90 degree bend. Fixing Base Rail Base Rails are fitted centrally over the stair string (side of the stairs) by drilling pilot holes through the rail and fixing with suitable countersunk wood screws. The screw heads need to be sunk below the surface of the base rail to allow the spindles and fillet strips to cover them from view. Use the same process on the landing by screwing to the landing sub floor Stair Case Building Regulations IMPORTANT - Spindles should not be spaced more than 99mm apart to meet current building regulations Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles Handrail height needs to be a minimum of 900mm. Measure from the floor to the top of the handrail on the landing area and measure from the front of a tread to the top of the handrail on the stairs. You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here
Store: www.go-banana.com
Price:
25.00
GBP
Go to the store